HPE Aruba R8M98A
HPE Aruba Networking AP-503 (RW) AP
$633.00
HPE Aruba Networking 503 Series Campus Access Points
HPE Aruba Networking 503 Series Campus Access Points deliver affordable Wi-Fi 6 coverage for indoor environments such as mid-sized offices, schools, and retail spaces where fewer people are on the network at the same time. With 1.49 Gbps maximum combined data rate, the 503 Series delivers cost-effective and reliable Wi-Fi for low to medium density environments.
The 503 Series is Wi-Fi CERTIFIED and supports 802.11ax features: OFDMA for multi-user efficiency, target wake time (TWT) to extend the battery life of connected IoT devices, and WPA3 and Enhanced Open for greater password and guest security. The 503 Series includes a limited lifetime warranty.
IoT platform capabilities
Using an optional IoT expansion radio, the 503 series can use the Bluetooth 5 and 802.15.4/Zigbee radio to simplify deploying and managing IoT-based location services, asset tracking services, security solutions, and IoT sensors. This allows organizations to leverage the 503 series as an IoT platform, which eliminates the need for an overlay infrastructure and additional IT resources.
HPE Aruba Networking Access Point-503 (RW) Dual Radio 2x2:2 802.11ax Wi-Fi 6 Campus Access Point
Access point type: Indoor, dual-radio, 2.4 GHz and 5 GHz (dual concurrent) 802.11ax 2x2 MIMO
2.4 GHz radio: Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate with 2SS HE40 802.11ax client devices (287 Mbps for HE20)
5 GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with 2SS HE80 802.11ax client devices
AP-503: Integrated downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 1.7 dBi in 2.4 GHz and 4.8 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the access point. The downtilt angle for maximum gain is roughly 30 degrees.
–Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 1.5 dBi in 2.4 GHz and 3.9 dBi in 5 GHz.
• E0: Ethernet wired network port (RJ-45)–Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDIX–POE-PD: 48Vdc (nominal) 802.3af PoE (class 3 or higher)–802.3az Energy Efficient Ethernet (EEE)
• USB 2.0 host interface (type A connector)–Capable of sourcing up to 100mA/500mW to an attached device
• Built-in Trusted Platform Module (TPM) for enhanced security and anti-counterfeiting
• Visual indicators (two multi-color LEDs): for System and Radio status
• Reset button: factory reset, LED mode control (normal/off)
• Serial console interface (proprietary, micro-B USB physical jack)
• Automatic thermal shutdown and recovery function
• The access point supports Power over Ethernet (PoE) on port E0
• Power sources are sold separately; see the 503 Series Ordering Guide for details
• Maximum (worst-case) power consumption: 10.9W
• Maximum (worst-case) power consumption in idle mode: 4.7W
• Both numbers assume no power is drawn from the USB interface–Drawing 0.5W from the USB interface increases max access point power consumption by up to 0.7W
Product dimensions:
3.5 x 14.5 x 14.5 cm
Weight:
255g
HPE Aruba Networking's hardware limited lifetime warranty.