HPE Aruba R2H22A
Aruba AP-504 (RW) Unified AP
$1005.00
HPE Aruba Networking 500 Series Campus Access Points
HPE Aruba Networking 500 Series Campus Access Points deliver cost-effective Wi-Fi 6 coverage for indoor environments such as mid-sized offices, schools, and retail spaces where fewer people are on the network at the same time. With 1.49 Gbps maximum combined data rate, the 500 Series delivers reliable Wi-Fi for medium density environments and is supported by HPE Aruba Networking Central, AI-powered management that simplifies and improves IT operations across branch, remote office, campus, data center, and IoT networks with a single point of visibility and control.
The 500 Series is Wi-Fi CERTIFIED™ and supports Wi-Fi 6 (802.11ax) features: OFDMA for multi-user efficiency, target wake time (TWT) to extend the battery life of connected IoT devices, and WPA3 and Enhanced Open for greater password and guest security. The 500 Series includes a limited lifetime warranty.
HPE Aruba Networking AP-504 (RW) Dual Radio 2x2:2 802.11ax External Antennas Unified Campus AP
Access point type: Indoor, dual radio, 5 GHz and 2.4 GHz 802.11ax 2x2 MIMO
5 GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with 2SS HE80 802.11ax client devices
2.4 GHz radio: Two spatial stream Single User (SU) MIMO for up to 574 Mbps (287 Mbps) wireless data rate with 2SS HE40 (HE20) 802.11ax client devices
Two (female) RP-SMA connectors for external dual band antennas (A0 and A1, corresponding with radio chains 0 and 1). Worstcase internal loss between radio interface and external antenna connectors: 0.7 dB in 2.4 GHz and 1.3 dB in 5 GHz.
E0: Ethernet wired network port (RJ-45):
— Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDIX E0: Ethernet wired network port (RJ-45)
— PoE-PD: 48Vdc (nominal) 802.3af/at PoE (class 3 or 4)
— 802.3az Energy Efficient Ethernet (EEE)
DC power interface:
12 Vdc (nominal, +/- 5%), accepts 2.1 mm/5.5 mm center-positive circular plug with 9.5 mm length
USB 2.0 host interface (type A connector):
Capable of sourcing up to 1A / 5W to an attached device
Bluetooth low energy (BLE5.0) and Zigbee (802.15.4) radio:
— BLE: up to 7 dBm transmit power (class 1) and -93 dBm receive sensitivity (1 Mbps) Bluetooth low energy (BLE5.0) and Zigbee (802.15.4) radio
— Zigbee: up to 6 dBm transmit power and -96 dBm receive sensitivity
Integrated vertically polarized omnidirectional antenna with roughly 30° downtilt and peak gain of 3.3 dBi
Visual indictors (two multi-color LEDs):
For system and radio status
Reset button:
Factory reset, LED mode control (normal/off)
Serial console：
interface Proprietary, micro-B USB physical jack
Security slot：
Kensington security slot
Dimensions：
37 x 160 x 161 mm (1.5 x 6.3 x 6.3 in)
Weight：
500 g (1.1 lb)
Power sources:
— The access point supports direct DC power and Power over Ethernet
— When both DC and PoE power sources are available, DC power takes priority over PoE
— Power sources are sold separately; see the 500 Series Ordering Guide for details
— When powered by DC or 802.3at (class 4) PoE, the access point will operate without restrictions
When powered by 802.3af (class 3) PoE and with the IPM feature disabled, the access point will disable the USB port. In the same configuration but with IPM enabled, the access point will start up in unrestricted mode, but may dynamically apply restrictions depending on the PoE budget and actual power. The feature restrictions and order can be programmed.
Power consumption：
Maximum (worst-case) power consumption (without/with a USB device attached):
— DC powered: 8.9W / 14.2W
— PoE powered (802.3at): 11.0W / 16.5W
— PoE powered (802.3af): 11.0W / 13.5W
— This assumes that up to 5W is supplied to the attached USB device
Maximum (worst-case) power consumption in idle mode: 4.3W (DC) or 6.2W (PoE)
Maximum (worst-case) power consumption in deep-sleep mode: 1.7W (DC) or 3.7W (PoE)
HPE Aruba Networking’s hardware limited lifetime warranty.