HPE Aruba Q9H62A

HPE Aruba Networking AP-515 (RW) Dual Radio 4x4:4 + 2x2:2 802.11ax Internal Antennas Unified Campus AP

Access point type: Indoor, dual radio, 5 GHz 802.11ax 4x4 MIMO and 2.4 GHz 802.11ax 2x2 MIMO

5 GHz radio:

• Four spatial streams Single User (SU) MIMO for up to 4.8 Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (max)

• Two spatial streams Single User (SU) MIMO for up to 1.2 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical)

• Four spatial streams Multi User (MU) MIMO for up to 4.8 Gbps wireless data rate to up to four 1SS or two 2SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (max)

• Four spatial streams Multi User (MU) MIMO for up to 2.4 Gbps wireless data rate to up to four 1SS or two 2SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)

2.4 GHz radio:

• Two spatial streams Single User (SU) MIMO for up to 574 Mbps wireless data rate to 2SS HE40 802.11ax client devices (max)

• Two spatial streams Single User (SU) MIMO for up to 287 Mbps wireless data rate to 2SS HE20 802.11ax client devices (typical)

AP-515: Four integrated dual-band downtilt omni-directional antennas for 4x4 MIMO (2x2 MIMO for 2.4 GHz) with peak antenna gain of 4.2 dBi in 2.4 GHz and 7.5 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the access point. The downtilt angle for maximum gain is roughly 30°.

• Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 3.8 dBi in 2.4 GHz and 4.6 dBi in 5 GHz.

E0: HPE Smart Rate port (RJ-45, maximum negotiated speed 2.5 Gbps)

–Auto-sensing link speed (100/1000/2500BASE-T) and MDI/ MDIX

–2.5 Gbps speeds comply with NBase-T and 802.3bz specifications

–PoE-PD: 48 VDC (nominal) 802.3af/at/bt (class 3 or higher)

–802.3az Energy Efficient Ethernet (EEE)

E1: 10/100/1000BASE-T Ethernet network interface (RJ-45)

–Auto-sensing link speed and MDI/MDIX

–802.3az Energy Efficient Ethernet (EEE)

Link Aggregation (LACP) support between both network ports for redundancy and increased capacity

DC power interface: 12 VDC (nominal, +/-5%), accepts 2.1 mm/5.5 mm center-positive circular plug with 9.5 mm length

USB 2.0 host interface (Type A connector)

–Capable of sourcing up to 1A/5W to an attached deviceData sheet Page 5

Bluetooth 5 and Zigbee (802.15.4) radio (2.4 GHz)

–Bluetooth 5: up to 8 dBm transmit power (class 1) and-95 receive sensitivity

–Zigbee: up to 8 dBm transmit power and -97 dBm receive sensitivity

–Integrated vertically polarized omnidirectional antenna with roughly 30° downtilt and peak gain of 3.5 dBi (AP-515) or 4.9 dBi (AP-514)

Visual indictors (two multi-color LEDs): for System and Radio status

 Reset button: factory reset, LED mode control (normal/off)

Serial console interface (proprietary, micro-B USB physical jack)

Kensington security slot

Product dimensions (metric):

46 x 200 x 200 mm

Weight:

810 g

 Maximum (worst-case) power consumption:

–DC powered: 16.0W–PoE powered (802.3af, IPM enabled): 13.5W

–PoE powered (802.3at/bt): 20.8W

–All numbers above are without an external USB device connected. When sourcing the full 5W power budget to such a device, the incremental (worst-case) power consumption for the access point is up to 5.7W (PoE powered) or 5.5W (DC powered)

•Maximum (worst-case) power consumption in idle mode: 12.6W (PoE) or 9.7W (DC)

•Maximum (worst-case) power consumption in deep-sleep mode: 5.9W (PoE) or 1.5W (DC)

HPE Aruba Networking’s hardware limited lifetime warranty.