HPE Aruba R7J27A
Aruba AP-635 (RW) Campus AP
$1798.00
HPE Aruba Networking 630 Series Campus Access Points
HPE Aruba Networking 630 Series Campus Access Points are designed to take advantage of the 6 GHz band using three radios for comprehensive tri-band coverage. With 6 GHz, wireless capacity is more than doubled allowing enterprises to meet the today needs and plan for future growth. The Wi-Fi 6E APs allow countries to take advantage of Wi-Fi 6E once it is approved in country through automated notification and easy deployment of 6 GHz regulatory tables. The 630 Series delivers a maximum aggregate 3.9 Gbps data rate for higher throughput and faster speeds for fixed low power indoor use. With up to seven 160 MHz channels, the 630 APs maximizes performance for low-latency, bandwidth-hungry applications. The ultra tri-band filtering eliminates interference between 5 GHz and 6 GHz and prevents gaps in channel coverage. To ensure high availability, the 630 Series includes dual port hitless failover for ethernet and power.
More Capacity and Wider Channels with Wi-Fi 6E
The HPE Aruba Networking 630 Series Campus Access Points deliver a maximum aggregate 3.9 Gbps data rate for higher throughput and faster speeds. With up to seven 160 MHz channels, the APs help maximize performance for low-latency, bandwidth-hungry applications. It is designed for low power indoor environments (LPI).
HPE Aruba Networking AP-635 (RW) Tri-radio 2x2:2 802.11ax Wi-Fi 6E Internal Antennas Campus AP
AP type: Indoor, tri radio, 2.4 GHz, 5 GHz and 6 GHz (concurrent) 802.11ax 2x2 MIMO
2.4 GHz radio:Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate with 2SS HE40 802.11ax client devices
5 GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with 2SS HE80 802.11ax client devices
6 GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4 Gbps wireless data rate with 2SS HE160 802.11ax client devices
Two integrated dual-band downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 4.6 dBi in 2.4 GHz, 7.0 dBi in 5 GHz and 6.3 dBi in 6 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 2.9 dBi in 2.4 GHz, 4.9 dBi in 5 GHz and 4.3 dBi in 6 GHz.
E0, E1: Two Ethernet wired network ports (RJ-45)
–Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDIX
–2.5 Gbps speed complies with NBase-T and 802.3bz specifications
–PoE-PD: 48 Vdc (nominal) 802.3at/bt PoE (class 4 or higher)
–802.3az Energy Efficient Ethernet (EEE)
–Link aggregation (LACP) support between both network ports for redundancy and increased capacity
DC power interface: 12 Vdc (nominal, +/- 5%), accepts 2.1 mm/5.5 mm center-positive circular plug with 9.5 mm length
USB 2.0 host interface (Type A connector):
–Capable of sourcing up to 1A/5W to an attached device
Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio:
–BLE: up to 5 dBm transmit power (class 1) and -100 dBm receive sensitivity (125 kbps)
–Zigbee: up to 5 dBm transmit power and -97 dBm receive sensitivity (250 kbps) – Integrated omnidirectional antenna with roughly 30° to 40° down-tilt and peak gain of 3.0 dBi
GNSS L1 (1575.42 MHz) receiver supporting GPS, Galileo, GLONASS, and BeiDou signal
–Receive sensitivity: -160 dBm (tracking)
– Integrated omnidirectional antenna with roughly 30° to 40° down-tilt and peak gain of 3.6 dBi Advanced IoT Coexistence (AIC) allows concurrent operation of multiple radios in the 2.4 GHz band
Built-in Trusted Platform Module (TPM) for enhanced security and anti-counterfeiting
Visual indicators (four multi-color LEDs): for System (1x) and Radio (3x) status
Reset button: factory reset, LED mode control (normal/off)
Serial console interface (proprietary, micro-B USB physical jack)
Dimensions/weight (HPE Aruba Networking AP-635; unit without mount bracket):
–220 mm (W) x 220 mm (D) x 51 mm (H)
–1300g
Dimensions/weight (AP-635; shipping):
–250 mm (W) x 240 mm (D) x 85 mm (H)
–1650g
• The access point supports direct DC power and Power over Ethernet (PoE) on port E0 and/or E1
• When both DC and PoE power sources are available, DC power takes priority over PoE
• When PoE power is supplied to both Ethernet ports, either port can be configured as the active power source
• Inactive/standby PoE power sources can be used to deliver hitless failover
• Power sources are sold separately; see the HPE Aruba Networking 630 Series Ordering Guide for details
• When powered by DC or 802.3bt (class 5) PoE, the access point will operate without restrictions.
• When powered by 802.3at (class 4) PoE with the IPM feature disabled, the access point will disable the USB port. No other restrictions will be applied.
• Operating the access point with an 802.3af (class 3 or lower) PoE source is not supported (except for access point staging).
HPE Aruba Networking’s hardware limited lifetime warranty.