HPE Aruba R3V36A
Aruba AP-503H (RW) Unified AP
$715.00
HPE Aruba Networking 500H Series Unified Hospitality Access Points
HPE Aruba Networking 500H Series Unified Hospitality Access Points delivers cost-effective Wi-Fi 6 coverage in a compact form factor that is ideal for hotels, residence halls, and remote offices. With 1.5 Gbps maximum combined speed, Zero Touch Provisioning, and wired ports, the 500H Series is ready to improve wireless experiences for guests, employees, students, and teleworkers.
The 500H Series is Wi-Fi CERTIFIED™ and supports 802.11ax features:OFDMA for multi-user efficiency, target wake time (TWT) to extend the battery life of connected IoT devices, and WPA3 and Enhanced Open for greater password and guest security. The 500H Series includes a limited lifetime warranty.
Ready for IoT
The HPE Aruba Networking 500H Series Unified Hospitality Access Points support Bluetooth 5 and Zigbee® wireless protocols through an integrated IoT radio. The AP-505H model also has an integrated USB port to support a range of IoT devices. The AP simplifies deploying and managing IoT location services, asset-tracking services, security solutions, and IoT sensors. HPE Aruba Networking Central client insights uses deep packet inspection to provide additional context and behavioral information that help verify devices are receiving proper policy enforcement and continuously monitor for rogue devices.
HPE Aruba Networking AP-503H (RW) Dual-radio 802.11ax 2x2 Unified Hospitality AP with 1+2 Ethernet
AP type:
Mid-range dual radio Wi-Fi 6 Hospitality AP with 1+2 Ethernet ports
5 GHz radio:
Two spatial stream (SU) MIMO for up to 1.2 Gbps wireless data rate (HE80)
2.4 GHz radio:
Two spatial stream (SU) MIMO for up to 287 Mbps wireless data rate (HE20)
(Note: HE40 operation is supported in 2.4 GHz, but uncommon and not recommended for enterprise deployments)
Two integrated semi-directional antennas for 2x2 MIMO with peak single antenna gain of 5.2dBi in 2.4GHz and 5.4dBi in 5GHz. Built-in antennas are optimized for vertical wall or desk mounted orientation of the AP.
Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 1.7dBi in 2.4GHz and 5.0dBi in 5GHz.
Uplink (E0):
AP-503H: Ethernet wired network port (RJ45)
• Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDIX
• 802.3az Energy Efficient Ethernet (EEE)
• PoE-PD: 802.3af PoE (class 3)
Local:
AP-503H (E1-E2): Two Ethernet wired network ports (RJ45)
• Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDIX
• 802.3az Energy Efficient Ethernet (EEE)
DC power interface:
AP-503H: • 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length
Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio:
• BLE: up to 7 dBm transmit power (class 1) and -100 dBm receive sensitivity (125 kbps)
• Zigbee: up to 7 dBm transmit power and -97 dBm receive sensitivity (250 kbps)
• Integrated semi-directional antenna with peak gain of 2.5 dBi (AP-503H) or 1.2dBi (AP-505H)
Visual indictors (two multi-color LEDs):
• Power/System status
• Radio status
• Local network port status (2x on AP-503H, 4x on AP-505H)
• PoE-PSE status (2x) (applies to AP-505H only)
Reset button:
Factory reset, LED mode control (normal/off)
Serial console interface:
Proprietary, micro-B USB physical jack
Crypto performance:
• Up to 500 Mbps
Power Sources: The AP supports direct DC power and Power over Ethernet
• The AP supports direct DC power and Power over Ethernet (PoE)
• When both DC and PoE power sources are available, DC power takes priority over PoE
• Power sources are sold separately; see the HPE Aruba Networking 500H Series Ordering Guide for details
Maximum (worst-case) power
AP-503H: • DC powered: 10.0W
• PoE powered (802.3af): 11.4W
Maximum (worst-case) power consumption in idle mode (without USB or PSE)
AP-503H: 4.5W (PoE)
Product dimensions:
150 x 86 x 47 mm
Weight:
360 gm
HPE Aruba Networking’s hardware limited lifetime warranty.